Super Handling-All Wheel Drive; (Sh-Awd ) System - Acura 2010 RL Owner's Manual

Starting in Second Gear
When you are in sequential shift
mode, and the vehicle is stopped,
pull the ＋ (right) paddle shifter to
shift to second gear. You will see
''M2'' in the display. Starting in
second gear helps to reduce
wheelspin in deep snow or on a
slippery surface.
Super Handling-All Wheel Drive (SH-AWD ) System
The super handling-all wheel drive
(SH-AWD) system is a full time all-
wheel-drive system that
automatically controls and transfers
varying amounts of engine torque to
all wheels independently, according
to the driving conditions.
While the SH-AWD system helps to
enhance the vehicle's driving
stability in all situations, it is still
your responsibility to drive and
corner at reasonable speeds and to
leave a sufficient margin of safety.
2010 RL
TM
SH-AWD Torque Distribution
Monitor
TORQUE INDICATOR
TORQUE INDICATOR
The SH-AWD torque distribution
monitor on the multi-information
display shows you the amount of
torque being sent to the wheels.
Each wheel − right front (RF), left
front (LF), right rear (RR), and left
rear (LR) has its own torque
−
indicator.
CONTINUED
407