Acura 2010 RL Owner's Manual page 241

Audio System
Manufactured under license under
U.S. Patent ＃ 's: 5,451,942; 5,956,674;
5,974,380; 5,978,762; 6,487,535 &
other U.S. and worldwide patents
issued & pending. DTS and DTS
Digital Surround are registered
trademarks and the DTS logos and
Symbol are trademarks of DTS, Inc.
1996-2007 DTS, Inc. All Rights
Reserved.
You cannot load and play 3-inch
(8-cm) discs in this system.
Do not use discs with adhesive labels.
The label can curl up and cause the
disc to jam in the unit.
238
Loading Discs in the Changer
To load multiple discs in one
operation:
1. Press and hold the LOAD button
on the changer unit until you hear
a beep. You will see ''BUSY'' on
the upper display, and the disc
load indicator turns red and starts
blinking.
2. Insert the disc into the disc slot
when the disc load indicator turns
green and ''LOAD'' appears in the
upper display at the same time.
Insert it only halfway; the drive
will pull it in the rest of the way.
You will see ''BUSY'' on the upper
display, and the disc load indicator
turns red again and blinks as the
disc is loaded.
3. When the disc load indicator turns
green and ''LOAD'' appears on the
upper display again, insert the
next disc in the slot.
2010 RL
Do not try to insert a disc until
''LOAD'' appears. You could
damage the audio unit.
Repeat steps 1 through 3 until all
4.
six positions are loaded. If you are
not loading all six positions, press
the LOAD button again after the
last disc has loaded.
If you stop loading discs before all
six positions are filled, the system
will wait for 15 seconds, stop the load
operation, and begin playing the last
disc loaded.
To load a single disc:
Press and release the LOAD
1.
button on the changer unit. You
will see ''BUSY'' on the upper
display, and the disc load indicator
turns red and starts blinking.