Table of Contents
Advertisement
Ventilation
The ventilation system draws in
outside air, circulates it through the
interior, then releases it through
vents near the rear window.
1.
Set the temperature to the lower
limit.
2.
Make sure the A/C is off.
3.
Select
and fresh air mode.
4.
Set the fan to the desired speed.
2010 RL
Climate Control System
Using the Heater
The heater uses engine coolant to
warm the air. If the engine is cold, it
will be several minutes before you
feel warm air coming from the
system.
1.
Select
and fresh air mode.
Set the fan to the desired speed.
2.
3.
Adjust the warmth of the air with
the temperature control bar.
Using the A/C
Air conditioning places an extra load
on the engine. Watch the engine
coolant temperature gauge (see page
70
). If it moves near the red zone,
turn off the A/C until the gauge
reading returns to normal.
If the interior is very warm,
cool it down more rapidly by partially
opening the windows, turning on the
air conditioning, and setting the fan
to maximum speed in fresh air mode.
you can
CONTINUED
209
Advertisement
Chapters
Table of Contents
