Acura 2010 RL Owner's Manual page 137

Multi-Information Display
Wiper Action
You can select from these two
settings when the wiper switch is in
the INT (intermittent) position:
INTERMITTENT − The
intermittent operation varies
according to the selection you make
on the wiper lever's intermittent
control ring.
WITH VEH SPD The intermittent
−
operation varies according to vehicle
speed.
134
While the multi-information display
is in the WIPER SETUP screen of
the CUSTOMIZE GROUP, press the
SEL/RESET button. The screen
changes to the above display.
2010 RL
Press the SEL/RESET button. The
screen changes as shown above.
Select INTERMITTENT or WITH
VEH SPD by pressing the INFO ( /
) button, then press the SEL/
▼
RESET button to enter your
selection.
▲