Jump Starting - Acura MDX Sport Hybrid 2020 Owner's Manual

Hide thumbs Also See for MDX Sport Hybrid 2020:
Table of Contents

Advertisement

Jump Starting

Jump Starting Procedure
Turn off the power to electric devices, such as audio and lights. Turn off the power
system, then open the hood.
Engine
Cover
Booster Battery
638
1. Pull up on the engine cover, remove it from
the pins.
u
Start on the passenger side and lift up on
the outermost edge of the cover.
u
Move towards the driver side while
applying uniform upward pressure.
Pin
2. Connect the first jumper cable to your
vehicle's 12-volt battery + terminal.
3. Connect the other end of the first jumper
cable to the booster battery + terminal.
u
Use a 12-volt booster battery only.
u
When using an automotive battery
charger to boost your 12-volt battery,
select a lower charging voltage than 15
volt. Check the charger manual for the
proper setting.
4. Connect the second jumper cable to the
booster battery - terminal.
1Jump Starting
WARNING
3
A 12-volt battery can explode if you do not
follow the correct procedure, seriously
injuring anyone nearby.
Keep all sparks, open flames, and smoking
materials away from the 12-volt battery.
Securely attach the jumper cables clips so that they
do not come off when the engine vibrates. Also be
careful not to tangle the jumper cables or allow the
cable ends to touch each other while attaching or
detaching the jumper cables.
12-volt Battery performance degrades in cold
conditions and may prevent the engine from starting.

Advertisement

Table of Contents
loading

Table of Contents