Table of Contents
Advertisement
Operation
8.3 Operation via the AOP30 operator panel
Resetting the AOP settings
In this menu, you reset the following settings to their default setting:
● Language
● Display settings
● Operation screen
● Control settings
1. Press the <▼> function key to select the "Yes" or "No" setting.
2. Confirm the setting with <OK>.
The settings become active immediately.
8.3.3.7
Commissioning / Service - AOP diagnostics
Commissioning / Service / AOP diagnostics menu structure
Figure 8-13
1. Press the <<MENU>> key.
2. Press the <▼> function key to select the "Commissioning/Service" row. Press the <OK>
132
–
"Yes:
All settings that are different from the factory settings are reset immediately. The setting
may cause the drive to switch to an unwanted operational states.
– "No":
The values are not reset
Commissioning / Service / AOP diagnostics menu structure
function key to confirm the selection.
SINAMICS GM150 6SL3810-2LN31-8AA2
Operating Instructions Rev.201910281332 EXAMPLE
Advertisement
Table of Contents
