Siemens SINAMICS GM150 Operating Instructions & Installation Instructions page 135

Keyboard test
Use this menu to test the function of each individual key of the AOP. Keys that you press are
represented on a symbolic keyboard on the display. You can press the keys in any order you
wish. If each key has been pressed at least once, you can exit the menu by pressing the <Back>
key.
You can also exit the "Keyboard test" menu by pressing and holding any key.
LED test
Use this menu to test the function of the AOP LEDs.
Flash FS formatting
The drive reads the ACX files to describe the parameters and alarms. The ACX files are
buffered in the Flash File System. The data is deleted after being parsed.
To rule out the risk of files being retained, the Flash File System can be manually deleted via
this menu item.
Note
The Flash memory is formatted, without further confirmation, after pressing the <OK> function
key.
Note
The CompactFlash card is not formatted.
Delete persistent database
The database with all parameter and alarm descriptions of the found topology is stored in the
battery-buffered RAM. The database is available immediately after a power off and on of the
supply voltage.
The "Delete persistent database" menu item deletes the database manually. The database will
be rebuilt during the next power up.
Note
The database is deleted immediately, without further confirmation, after pressing the <OK>
function key.
SINAMICS GM150 6SL3810-2LN31-8AA2
Operating Instructions Rev.201910281332 EXAMPLE
8.3 Operation via the AOP30 operator panel
Operation
135