Operation
8.3 Operation via the AOP30 operator panel
Recommendation: Set the ramp-up/ramp-down time just as for p1120/p1121. Adjusting the
AOP ramp-up/ramp-down time does not affect the setting of parameters p1120/p1121,
because this is an AOP-specific setting.
Definition of the ramp-up/ramp-down time:
Example: With the ramp-up time set at 50 s, the maximum setpoint is reached by pressing the
<+> key in 50 s.
8.3.2.3
Inhibit functions
For protection against improper setting of the parameters or accidental use of the control keys,
you can activate various inhibit functions.
The menu structure of the inhibit functions
Calling up the inhibit function menu
1. Press the key with the key symbol.
The various inhibit functions are described in the following.
114
SINAMICS GM150 6SL3810-2LN31-8AA2
Operating Instructions Rev.201910281332 EXAMPLE