Commissioning / Service Device Commissioning - Siemens SINAMICS GM150 Operating Instructions & Installation Instructions

Displaying alarms
Alarms are displayed by the yellow "ALARM" LED. Additionally, an appropriate note relating to
the cause is displayed on the operator panel. Up to eight alarms occurring at the same time are
displayed.
Figure 8-9
8.3.3.4

Commissioning / service device commissioning

Commissioning / service / device commissioning menu structure
Figure 8-10
1. Press the <<MENU>> key.
2. Press the <▼> function key to select the "Commissioning/Service" row. Press the <OK>
3. Press the <▼> function key to select the "Device commissioning" row. Press the <OK>
SINAMICS GM150 6SL3810-2LN31-8AA2
Operating Instructions Rev.201910281332 EXAMPLE
Alarm screen
Commissioning / service / device commissioning menu structure
function key to confirm the selection.
function key to confirm the selection.
– The menus marked with "*" appear only when the "special access" access level was
selected
8.3 Operation via the AOP30 operator panel
Operation
123