D-Link DGS-1250 Series Reference Manual page 85

DGS-1250 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
After click the Edit button, the following page will appear. This is a dynamic page that will change when a different
VLAN Mode is selected. When Access was selected as the VLAN Mode, the following page will appear.
The fields that can be configured are described below:
Parameter
VLAN Mode
Acceptable Frame
Ingress Checking
VID
Clone
From Port - To Port
Click the Apply button to accept the changes made.
Click the Back button to discard the changes made and return to the previous page.
When Hybrid was selected as the VLAN Mode, the following page will appear.
The fields that can be configured are described below:
Parameter
VLAN Mode
Figure 5-15 VLAN Interface (Access) Window
Description
Select the VLAN mode option here. Options to choose from are Access, Hybrid,
and Trunk.
Select the acceptable frame behavior option here. Options to choose from are
Tagged Only, Untagged Only, and Admit All.
Select to enable or disable the ingress checking function.
Enter the VLAN ID used for this configuration here. This value must be between 1
and 4094.
Select this option to enable the clone feature.
Select the range of ports that will be used in the clone feature here.
Figure 5-16 VLAN Interface (Hybrid) Window
Description
Select the VLAN mode option here. Options to choose from are Access, Hybrid,
and Trunk.
76