D-Link DGS-1250 Series Reference Manual page 68

DGS-1250 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
Parameter
Click the Apply button to accept the changes made.
Click the Find button to locate a specific entry based on the information entered.
Click the Edit button to re-configure the specific entry.
Click the Delete button to remove the specific entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
Description
option and fill indicator will be ignored and the actual string will be used
directly.
○ keyword - Indicates that the keyword will be translated based on the
actual value of the system. The following keyword definitions specifies
that a command will be refused if an unknown or unsupported keyword
is detected:
 devtype - The model name of the device. Only an ASCII string is
allowed.
 sysname - Indicates the System name of the Switch. Only an
ASCII string is allowed.
 ifdescr - Derived from ifDescr (IF-MIB). Only an ASCII string is
allowed.
 portmac - Indicates the MAC address of a port. This can be either
an ASCII string or a hexadecimal value. When in the format of an
ASCII string, the MAC address format can be customized using
special CLI commands. When in the format of a hexadecimal
value, the MAC address will be encapsulated in order in
hexadecimal.
 sysmac - Indicates the system MAC address. This can be either
an ASCII string or a hexadecimal value. In the ASCII string format,
the MAC address format can be customized using special CLI
commands. In the hexadecimal format, the MAC address will be
encapsulated in order in hexadecimal.
 module - Indicates the module ID number. This can be either an
ASCII string or a hexadecimal value.
 port - Indicates the local port number. This can be either an ASCII
string or a hexadecimal value.
 svlan - Indicates the outer VLAN ID. This can be either an ASCII
string or a hexadecimal value.
 cvlan - Indicates the inner VLAN ID. This can be either an ASCII
string or a hexadecimal value.
○ : - Indicates the end of the formatted key sting. If a formatted key string
is the last parameter of the command, its ending character (":") can be
ignored. The space (0x20) between "%" and ":" will be ignored. Other
spaces will be encapsulated.
• ASCII strings can be any combination of formatted key strings and 0~9, a~z,
A~Z, !@#$%^&*()_+|-=\[]{};:'"/?.,<>`, and space characters. "\" is the escape
character. The special character after "\" is the character itself, for example,
"\%" is "%" itself, not the start indicator of a formatted key string. Spaces not
in the formatted key string will also be encapsulated.
• Hexadecimal values can be any combination of formatted key strings and
0~9, A~F, a~f, and space characters. The formatted key strings only support
keywords that support hexadecimal values. Spaces not in the formatted key
string will be ignored.
59