D-Link DGS-1250 Series Reference Manual page 212

DGS-1250 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
Click the Apply button to accept the changes made.
Click the Edit button to re-configure the specific entry.
Click the Delete button to remove the specified entry.
After clicking the Please Select button, the following window will appear:
Select the radio button next to the entry to use that ACL in the configuration.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
Click the OK button to accept the selection made.
IPv6 Source Guard
IPv6 Source Guard Settings
This window is used to display and configure the IPv6 source guard settings.
To view the following window, click Security > IMPB > IPv6 > IPv6 Source Guard > IPv6 Source Guard Settings,
as shown below:
The fields that can be configured in IPv6 Source Guard Policy Settings are described below:
Parameter
Policy Name
Figure 9-46 ACL Access List Window
Figure 9-47 IPv6 Source Guard Settings Window
Description
Enter the policy name here. This name can be up to 32 characters long.
203