D-Link DGS-1250 Series Reference Manual page 249

DGS-1250 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
Parameter
Time Range
Click the Apply button to accept the changes made for each individual section.
Click the Delete button to remove the specified entry.
After clicking the Power Saving Shutdown Settings tab, the following page will appear.
The fields that can be configured are described below:
Parameter
From Port - To Port
Time Range
Click the Apply button to accept the changes made.
Click the Delete button to remove the specified entry.
Description
• Hibernation - Specifies to add or delete a time range profile for the system
hibernation schedule. When the system enters the hibernation mode, the
Switch goes into a low powered state and idle. It shuts down all the ports and
LEDs, all network functions is disabled, and only the console connection
works through the RS232 port. If the Switch is an endpoint PSE, power is not
provided through the ports.
Enter the name of the time range to associate with the power saving type.
Figure 12-2 Power Saving Shutdown Settings Window
Description
Select the appropriate port range used for the configuration here.
Enter the name of the time range to associate with the ports.
240