D-Link DGS-1250 Series Reference Manual page 255

DGS-1250 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
Configuration Backup to HTTP
This window is used to initiate a configuration file backup to a local PC using HTTP.
To view the following window, click Tools > Configuration Restore & Backup > Configuration Backup to HTTP, as
shown below:
The fields that can be configured are described below:
Parameter
Source File
Click the Backup button to initiate the configuration file backup.
Configuration Backup to TFTP
This window is used to initiate a configuration file backup to a TFTP server.
To view the following window, click Tools > Configuration Restore & Backup > Configuration Backup to TFTP, as
shown below:
The fields that can be configured are described below:
Parameter
TFTP Server IP
Source File
Figure 13-8 Configuration Backup to HTTP Window
Description
Select the configuration on the Switch that will be backed up to the local PC here.
Options to choose from are:
• Configuration 1 - Select this option to backup configuration 1.
• Configuration 2 - Select this option to backup configuration 2.
• running-config - Select this option to backup the running configuration.
• startup-config - Select this option to backup the start-up configuration.
Figure 13-9 Configuration Backup to TFTP Window
Description
Select and enter the IP address of the TFTP server here.
• IPv4 - Specifies to select and enter the IPv4 address of the TFTP server.
• IPv6 - Specifies to select and enter the IPv6 address of the TFTP server.
Select the configuration on the Switch that will be backed up to the TFTP server
here. Options to choose from are:
• Configuration 1 - Select this option to backup configuration 1.
• Configuration 2 - Select this option to backup configuration 2.
• running-config - Select this option to backup the running configuration.
• startup-config - Select this option to backup the start-up configuration.
246