D-Link DGS-1250 Series Reference Manual page 47

DGS-1250 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
To view the following window, click Management > SNMP > SNMP Community Table Settings, as shown below:
The fields that can be configured are described below:
Parameter
Key Type
Community Name
View Name
Access Right
IP Access-List Name
Click the Add button to add a new entry based on the information entered.
Click the Delete button to remove the specified entry.
Figure 4-6 SNMP Community Table Settings Window
Description
The only supported key type is Plain Text.
Enter an alphanumeric string of up to 32 characters that is used to identify
members of an SNMP community. This string is used like a password to give
remote SNMP managers access to MIB objects in the Switch's SNMP agent.
Enter an alphanumeric string of up to 32 characters that is used to identify the
group of MIB objects that a remote SNMP manager is allowed to access on the
Switch. The view name must exist in the SNMP View Table.
Select the access right here. Options to choose from are Read Only and Read
Write.
• Read Only - SNMP community members using the community string created
can only read the contents of the MIBs on the Switch.
• Read Write - SNMP community members using the community string
created can read from, and write to the contents of the MIBs on the Switch.
Enter the name of the standard access list to restrict the users that can use this
community string to access to the SNMP agent.
38