D-Link DGS-1250 Series Reference Manual page 274

DGS-1250 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
Click the Boot File button to configure the bootup image and configuration file settings.
Click the c: hyperlink to navigate the C: drive
After clicking the c: hyperlink, the following window will appear.
Click the Go button to navigate to the path entered.
Click the Previous button to return to the previous window.
Click the Copy button to copy a specific file to the Switch.
Click the Boot File button to configure the bootup image and configuration file settings.
Click the Delete button to remove a specific file from the file system.
After clicking the Copy button, the following windows will appear.
The fields that can be configured are described below:
Parameter
Source
Destination
Figure 14-15 File System (c:) Window
Figure 14-16 File System (Copy) Window
Description
Select the source for the copy here. Options to choose from:
• startup-config - Specifies to copy the startup configuration as the source.
• Image 1 - Specifies to copy firmware "Image 1" as the source.
• Image 2 - Specifies to copy firmware "Image 2" as the source.
• Configuration 1 - Specifies to copy "Configuration 1" as the source.
• Configuration 2 - Specifies to copy "Configuration 2" as the source.
Select the destination for the copy here. Options to choose from:
• running-config - Specifies to overwrite the running configuration with the
source.
• startup-config - Specifies to overwrite the start-up configuration with the
source.
• Image 1 - Specifies to overwrite "Image 1" with the source.
• Image 2 - Specifies to overwrite "Image 2" with the source.
265