D-Link DGS-1250 Series Reference Manual page 73

DGS-1250 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Path
Click the Go button to navigate to the path entered.
Click the Copy button to copy a specific file to the Switch.
Click the Boot File button to configure the bootup image and configuration file settings.
Click the c: hyperlink to navigate the C: drive
After clicking the c: hyperlink, the following window will appear:
Click the Go button to navigate to the path entered.
Click the Previous button to return to the previous window.
Click the Copy button to copy a specific file to the Switch.
Click the Boot File button to configure the bootup image and configuration file settings.
Click the Delete button to remove a specific file from the file system.
NOTE: If the boot configuration file is damaged, the Switch will automatically revert back to the
default configuration.
NOTE: If the boot image file is damaged, the Switch will automatically use the backup image file in
the next boot up.
After clicking the Copy button, the following window will appear.
The fields that can be configured in Copy File are described below:
Parameter
Source
Description
Enter the path string.
Figure 4-43 File System (Drive) Window
Figure 4-44 File System (Copy) Window
Description
Select the source for the copy here. Options to choose from:
64