D-Link DGS-1250 Series Reference Manual page 213

DGS-1250 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
Parameter
Global Auto-Configure
Address
Link Local Traffic
Click the Apply button to accept the changes made.
Click the Edit button to re-configure the specific entry.
Click the Delete button to remove the specified entry.
The fields that can be configured in IPv6 Source Guard Attach Policy Settings are described below:
Parameter
Policy Name
Target Port
From Port - To Port
Click the Apply button to accept the changes made.
Click the Delete All button to remove all the entries.
Click the Delete button to remove the specified entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
IPv6 Neighbor Binding
This window is used to display and configure the IPv6 neighbor binding settings.
To view the following window, click Security > IMPB > IPv6 > IPv6 Source Guard > IPv6 Neighbor Binding, as
shown below:
Description
Select to Permit of Deny data traffic from the auto-configured global address. It is
useful when all global addresses on a link are assigned by DHCP and the
administrator that wants to block hosts with self-configured addresses from
sending traffic. By default, Permit is used.
Select to Permit of Deny hardware permitted data traffic send by the link-local
address. By default, Deny is used.
Description
Enter the policy name here. This name can be up to 32 characters long.
Select this option to specify the target port.
Select the appropriate port range used for the configuration here.
Figure 9-48 IPv6 Neighbor Binding Window
204