D-Link DGS-1250 Series Reference Manual page 115

DGS-1250 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
MLD Snooping Settings
This window is used to display and configure the MLD snooping settings.
To view the following window, click L2 Features > L2 Multicast Control > MLD Snooping > MLD Snooping
Settings, as shown below:
The fields that can be configured in Global Settings are described below:
Parameter
Global State
Click the Apply button to accept the changes made.
The fields that can be configured in VLAN Status Settings are described below:
Parameter
VID
Click the Apply button to accept the changes made.
The fields that can be configured in MLD Snooping Table are described below:
Parameter
VID
Click the Find button to locate a specific entry based on the information entered.
Click the Show All button to view all the entries.
Click the Show Detail button to see the detail information of the specific VLAN.
Click the Edit button to re-configure the specific entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
Figure 5-50 MLD Snooping Settings Window
Description
Select this option to enable or disable the global MLD snooping state.
Description
Enter a VLAN ID from 1 to 4094, and select to enable or disable MLD snooping on
the VLAN.
Description
Enter a VLAN ID from 1 to 4094.
106