D-Link DGS-1250 Series Reference Manual page 155

DGS-1250 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Class Map Name
Multiple Match Criteria
Click the Apply button to accept the changes made.
Click the Match button to configure the specific entry.
Click the Delete button to remove the specific entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
After clicking the Match button, the following page will be available.
The fields that can be configured are described below:
Parameter
None
Specify
ACL Name
CoS List
DSCP List
Precedence List
Protocol Name
VLAN List
Click the Apply button to accept the changes made.
Click the Back button to discard the changes made and return to the previous page.
Description
Enter the class map name here. This name can be up to 32 characters long.
Select the multiple match criteria option here. Options to choose from are Match
All and Match Any.
Figure 7-11 Class Map (Match) Window
Description
Select this option to match nothing to this class map.
Select the option to match something to this class map.
Select and enter the access list name that will be matched with this class map
here. This name can be up to 32 characters long.
Select and enter the CoS list value that will be matched with this class map here.
This value must be between 0 and 7.
Select and enter the DSCP list value that will be matched with this class map
here. This value must be between 0 and 63. Tick the IPv4 only option to match
IPv4 packets only. If not specified, the match is for both IPv4 and IPv6 packets.
Select and enter the precedence list value that will be matched with this class
map here. This value must be between 0 and 7. Tick the IPv4 only option to
match IPv4 packets only. If not specified, the match is for both IPv4 and IPv6
packets. For IPv6 packets, the precedence is most three significant bits of traffic
class of IPv6 header.
Select the protocol name that will be matched with the class map here. Options to
choose from are ARP, BGP, DHCP, DNS, EGP, FTP, IPv4, IPv6, NetBIOS, NFS,
NTP, OSPF, PPPOE, RIP, RTSP, SSH, Telnet, and TFTP.
Select and enter the VLAN list value that will be matched with the class map here.
This value must be between 1 and 4094.
146