D-Link DGS-1250 Series Reference Manual page 254

DGS-1250 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Source File
Destination File
Replace
Click the Restore button to initiate the configuration restore.
Configuration Restore from TFTP
This window is used to initiate a configuration restore from a TFTP server.
To view the following window, click Tools > Configuration Restore & Backup > Configuration Restore from TFTP,
as shown below:
The fields that can be configured are described below:
Parameter
TFTP Server IP
Source File
Destination File
Replace
Click the Restore button to initiate the configuration restore.
Description
Click the Browse button and navigate to the configuration file on the local PC
here. This file will be uploaded to the Switch.
Select the destination for the configuration file on the Switch here. Options to
choose from are:
• Configuration 1 - Select this option to use configuration 1 as the destination.
• Configuration 2 - Select this option to use configuration 2 as the destination.
• running-config - Select this option to use the running configuration as the
destination.
• startup-config - Select this option to use the start-up configuration as the
destination.
Select this option to replace the running configuration on the Switch with this one.
Figure 13-7 Configuration Restore from TFTP Window
Description
Select and enter the IP address of the TFTP server here.
• IPv4 - Specifies to select and enter the IPv4 address of the TFTP server.
• IPv6 - Specifies to select and enter the IPv6 address of the TFTP server.
Enter the filename and path of the configuration file on the TFTP server here. This
will be uploaded to the Switch. This field can be up to 64 characters long.
Select the destination for the configuration file on the Switch here. Options to
choose from are:
• Configuration 1 - Select this option to use configuration 1 as the destination.
• Configuration 2 - Select this option to use configuration 2 as the destination.
• running-config - Select this option to use the running configuration as the
destination.
• startup-config - Select this option to use the start-up configuration as the
destination.
Select this option to replace the running configuration on the Switch with this one.
245