D-Link DGS-1250 Series Reference Manual page 205

DGS-1250 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
From Port - To Port
State
Validation
Click the Apply button to accept the changes made.
IP Source Guard Binding
This window is used to display and configure the IPSG binding settings.
To view the following window, click Security > IMPB > IPv4 > IP Source Guard > IP Source Guard Binding, as
shown below:
The fields that can be configured in IP Source Binding Settings are described below:
Parameter
MAC Address
VID
IP Address
From Port - To Port
Click the Apply button to accept the changes made.
The fields that can be configured in IP Source Binding Entry are described below:
Parameter
From Port - To Port
IP Address
Description
Select the appropriate port range used for the configuration here.
Select to enable or disable the IPSG's state for the specified port(s) here.
Select the validation method used here. Options to choose from are IP and IP-
MAC. Selecting IP means that the IP address of the received packets will be
checked. Selecting IP-MAC means that the IP address and the MAC address of
the received packets will be checked.
Figure 9-37 IP Source Guard Binding Window
Description
Enter the MAC address of the binding entry here.
Enter the VLAN ID of the binding entry here.
Enter the IP address of the binding entry here.
Select the appropriate port range used for the configuration here.
Description
Select the appropriate port range used for the query here.
Enter the IP address of the binding entry here.
196