D-Link DGS-1250 Series Reference Manual page 60

DGS-1250 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
DHCP Relay Pool Settings
This window is used to display and configure the DHCP relay pool on a DHCP relay agent.
To view the following window, click Management > DHCP > DHCP Relay > DHCP Relay Pool Settings, as shown
below:
The fields that can be configured are described below:
Parameter
Pool Name
Click the Apply button to accept the changes made.
Click the Edit button to modify the corresponding information of the specific DHCP pool.
Click the Delete button to remove the specified entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
After clicking the Edit button under Source, the following window will appear.
The fields that can be configured are described below:
Parameter
Source IP Address
Subnet Mask
Click the Apply button to accept the changes made.
Click the Delete button to remove the specified entry.
Click the Back button to return to the previous window.
Figure 4-25 DHCP Relay Pool Settings Window
Description
Enter the address pool name with a maximum of 32 characters.
Figure 4-26 DHCP Relay Pool Source Settings Window
Description
Enter the source subnet of client packets.
Enter the network mask of the source subnet.
51