D-Link DGS-1250 Series Reference Manual page 200

DGS-1250 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
Dynamic ARP Inspection
ARP Access List
This window is used to display and configure the dynamic ARP inspection settings.
To view the following window, click Security > IMPB > IPv4 > Dynamic ARP Inspection > ARP Access List, as
shown below:
The fields that can be configured are described below:
Parameter
ARP Access List Name
Click the Add button to add a new entry based on the information entered.
Click the Edit button to re-configure the specific entry.
Click the Delete button to remove the specified entry.
After clicking the Edit button, the following window will appear.
The fields that can be configured are described below:
Parameter
Action
IP
Figure 9-29 ARP Access List Window
Description
Enter the ARP access list name used here. This name can be up to 32 characters
long.
Figure 9-30 ARP Access List (Edit) Window
Description
Select the action that will be taken here. Options to choose from are Permit and
Deny.
Select the type of sender IP address that will be used here. Options to choose
from are Any, Host, and IP with Mask.
191