D-Link DGS-1250 Series Reference Manual page 74

DGS-1250 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
Parameter
Destination
Replace
Click the Apply button to initiate the copy.
Click the Cancel button the discard the process.
After clicking the Boot File button, the following window will appear.
The fields that can be configured in Boot File are described below:
Parameter
Boot Image
Boot Configuration
Click the Apply button to accept the changes made.
Click the Cancel button to discard the changes made.
Description
• startup-config - Specifies to copy the startup configuration as the source.
• Image 1 - Specifies to copy firmware "Image 1" as the source.
• Image 2 - Specifies to copy firmware "Image 2" as the source.
• Configuration 1 - Specifies to copy "Configuration 1" as the source.
• Configuration 2 - Specifies to copy "Configuration 2" as the source.
Select the destination for the copy here. Options to choose from:
• running-config - Specifies to overwrite the running configuration with the
source.
• startup-config - Specifies to overwrite the start-up configuration with the
source.
• Image 1 - Specifies to overwrite "Image 1" with the source.
• Image 2 - Specifies to overwrite "Image 2" with the source.
• Configuration 1 - Specifies to overwrite "Configuration 1" with the source.
• Configuration 2 - Specifies to overwrite "Configuration 2" with the source.
Specifies to replace the current running configuration with the indicated
configuration file.
Figure 4-45 File System (Boot File) Window
Description
Select the boot image here. Options to choose from are Image 1 and Image 2.
Select the boot configuration here. Options to choose from are Configuration 1
and Configuration 2.
65