D-Link DGS-1250 Series Reference Manual page 257

DGS-1250 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
Parameter
Source File
Destination File
Click the Restore button to initiate the certificate and key restore.
Certificate & Key Backup to HTTP
This window is used to initiate a certificate and key backup to a local PC using HTTP.
To view the following window, click Tools > Certificate & Key Upgrade & Backup > Certificate & Key Backup to
HTTP, as shown below:
The fields that can be configured are described below:
Parameter
Source File
Click the Backup button to initiate the certificate and key backup.
Certificate & Key Backup to TFTP
This window is used to initiate a certificate and key backup to a TFTP server.
To view the following window, click Tools > Certificate & Key Upgrade & Backup > Certificate & Key Backup to
TFTP, as shown below:
Description
• IPv4 - Specifies to select and enter the IPv4 address of the TFTP server.
• IPv6 - Specifies to select and enter the IPv6 address of the TFTP server.
Enter the filename and path of the certificate and key file on the TFTP server
here. This will be uploaded to the Switch. This field can be up to 64 characters
long.
Enter the filename and path of the certificate and key file that will be stored on the
Switch here. This field can be up to 64 characters long.
Figure 13-12 Certificate & Key Backup to HTTP Window
Description
Enter the filename and path of the certificate and key file on the Switch here. This
will be downloaded to the local PC using HTTP. This field can be up to 64
characters long.
Figure 13-13 Certificate & Key Backup to TFTP Window
248