Siemens SINUMERIK 840D sl Commissioning Manual page 5

08/2005
Saftey information
This manual contains information which you should observe in order to ensure your
own personal safety, as well to avoid material damage.
Notes relating to your personal safety are highlighted in the manual by means of a
warning triangle, no warning triangle appears in conjunction with notes that relate
to property damage. The warnings appear in decreasing order of risk as given
below.
!
Danger
indicates that death or severe personal injury will result if proper precautions are
not taken.
!
Warning
indicates that death or severe personal injury may result if proper precautions are
not taken.
!
Caution
with a warning triangle indicates that minor personal injury can result if proper
precautions are not taken.
Caution
without a warning triangle means that material damage can occur if the appropriate
precautions are not taken.
Notice
indicates that an unwanted result or situation can result if the appropriate advice is
not taken into account.
If several risks are present, the warning notice for the highest risk level is always
used. If a warning notice with a warning triangle refers to personal injury, this
warning can also additionally contain a warning referring to property damage.
Qualified personnel
The device/system described may be installed and operated only in conjunction
with this documentation. A device/system may be commissioned and operated by
qualified personnel only. Qualified personnel in the sense of the safety-related
information of this documentation are persons authorized to start up, earth and
mark devices, systems and circuits in accordance with the standards of the safety
technology.
© Siemens AG, 2005. All rights reserved
SINUMERIK 840D sl/840D/840Di/810D Commissioning CNC Part 2 (HMI) (IAM) – 08/2005 Edition
Preface
v