Siemens SINUMERIK 840D sl Commissioning Manual page 421

08/2005
Note
When using the "Reversible spindles" or "Axis container" functions, the spindle
status is output before the spindle reversal or assignment to axis/spindle
container, i.e. the spindle number displayed under spindle status is the "logical"
spindle.
Activation
The function is activated by MD 9052 SHOW_CHANNEL_SPANNING_STATE > 0.
Changes in MD 9052 take effect after a POWER ON.
This function is available if it is activated by means of the following machine data
element:
9052
MD number
Default value: 0
Changes effective after POWER ON
Data type: STRING
Meaning
SINUMERIK status display
The following four predefined displays are available:
1 Channel status
2 Channel status
3 Channel status
4 Spindle status
1 channel status
The channel status, feed stop, and spindle status are output as an icon at the
display position. The channel status icons can be superimposed with the "Spindle
not enabled" or "Feed not enabled" icon.
The following hierarchy applies (from highest to lowest priority):
1. Channel STOP
2. Spindle not enabled
3. Feed is not enabled
4. Channel active
5. Channel RESET
Syntax:
ChanStatFeedStopSpindleStop = <Channel number>
Spindles = <Spindle number1>,...,<Spindle number n>
Channel number:
© Siemens AG, 2005. All rights reserved
SINUMERIK 840D sl/840D/840Di/810D Installation and Start-Up HMI (IAM) - 08/2005 Edition
SHOW_CHANNEL_SPANNING_STAT
Change cross-channel status display
Min. input value: 0
Protection level (R/W) 4/1
Applies from version 6.2
Cross-channel status display:
0 = Display previous program status in header
1 = Display in program status line in header according to configuration in
Header.ini file.
(active, stopped, RESET) with superimposed spindle stop
and feed stop
(active, stopped, RESET) with superimposed feed stop
(active, stopped, RESET)
counterclockwise direction, clockwise direction, spindle
stop, spindle halt M05)
Number of channel
Commissioning HMI Advanced (IM4)
2 Setting Functions and Parameters
Max. input value: 1
Unit: -
(Highest priority)
(Lowest priority)
IM4/2-27