Siemens SINUMERIK 840D sl Commissioning Manual page 169

08/2005
Operating area
* This involves Siemens screen forms.
Start hotkeys for HT6
The start hotkeys named here can be used to activate the associated configuration
files.
The possible start hotkeys for screen forms are pre-defined. No additional start
hotkeys can be configured. Access points are specific to operating areas.
HCyyy=File
HCyyy hotkey connection (connecting the hotkey with the configuration file). yyy
stands for one of the internal hotkey identities listed below for the start hotkeys; file
is the name of the configuration file identities for start hotkeys:
HCyyy
HC1
HC2
HC3
HC4
HC5
HC6
HC7
HC8
HC11
HC12
HC21
© Siemens AG, 2005. All rights reserved
SINUMERIK 840D sl/840D/840Di/810D HMI Installation and Start-Up Guide (IAM) – 08/2005 Edition
SCxxx Screen form:
SC8454 Program-Miscellaneous
operating area
SC857 Messages/Alarms operating
area
SC858 Messages/Alarms operating
area
SC867 Tools/Zero offsets operating
area
SC8493 Program-G-Code-Editor
operating area
SC8494 Program-G-Code-Editor
operating area
SC8495 Program-G-Code-Editor
operating area
Key:
User key U1
User key U2
User key U3
User key U4
User key U5
User key U6
User key U7
User key U8
Special key S1
Special key S2
TEACH key
Expanding the Operator Interface (BE1)
7 Configuring and Working Environment
Vertical SK 4
Horizontal SK 7
Horizontal SK 8
Horizontal SK 7
Horizontal SK 3
(drilling cycles
support) *
Horizontal SK 4
(milling cycles
support) *
Horizontal SK 5
(turning cycles
support) *
BE1/7-163