Siemens SINUMERIK 840D sl Commissioning Manual page 316

Starting Up HMI Embedded (IM2)
4 Functions/Parameterization
Memory allocation: interpolation buffer
When you select the "Interpolation buffer" area and click the "Details" softkey, you
can display and edit the memory settings in the following machine data:
Memory allocation: execute from external
When you select the "Execution from external source" area and click the "Details"
softkey, you can display and edit the memory settings in the following machine
data:
Memory allocation: synchronized actions
When you select the "Synchronized actions" area and click the "Details" softkey,
you can display and edit the memory settings in the machine data of the following
areas:
"Synchronized action 1":
"Synchronized action 2":
Memory allocation: macros
When you select the "Macros" area and click the "Details" softkey, you can display
and edit the memory settings in the following machine data:
Memory allocation: tool management
When you select the "Tool management" area and click the "Details" softkey, you
can display and edit the memory settings in the following machine data:
Memory allocation: protection zones
See Section: Static user memory (SRAM), memory allocation: Protection zones.
IM2/4-66
SINUMERIK 840D sl/840D/840Di/810D HMI Installation and Start-Up Guide (IAM) – 08/2005 Edition
MD 28060: MM_IPO_BUFFER_SIZE
MD 28070: MM_NUM_BLOCKS_IN_PREP
MD 18360: MM_EXT_PROG_BUFFER_SIZE
MD 18362: MM_EXT_PROG_NUM
MD 28250: MM_NUM_SYNC_ELEMENTS
MD 28252: MM_NUM_FCTDEF_ELEMENTS
MD 28258: MM_NUM_AC_TIMER
MD 28254: MM_NUM_AC_PARAM
MD 28256: MM_NUM_AC_MARKER
MD 18160: MM_NUM_USER_MACROS
MD 18105: MM_MAX_CUTTING_EDGE_NO
MD 18106: MM_MAX_CUTTING_EDGE_PERTOOL
© Siemens AG, 2005. All rights reserved
08/2005