Siemens SINUMERIK 840D sl Commissioning Manual page 30

Expanding the Operator Interface (BE1)
3 Syntax
• Insertion of a space before or after the equals sign is optional.
• If a command is configured only with a file name, then the file search strategy is
as follows:
Table 3-1
Entry
No file name, no path name
File name
File name and path name
File name and NC path name
Example
A new screen form is called via start softkey "Example" from the Parameters
operating area.
//S(Start)
HS7=("Example", ac7, se1)
PRESS(HS7)
LM("Form1")
END_PRESS
//END
//M(Form1/"Cycles")
HS1=("")
HS2=("")
HS3=("")
HS4=("")
HS5=("")
HS6=("")
HS7=("")
HS8=("")
VS1=("")
VS2=("")
VS3=("")
VS4=("")
VS5=("")
VS6=("")
VS7=("")
VS8=("")
...
//END
BE1/3-24
SINUMERIK 840D sl/840D/840Di/810D HMI Installation and Start-Up Guide (IAM) – 08/2005 Edition
Search method
;Methods
Search in ...
COM file of current screen form
User cycles directory
Manufacturer cycles directory
Standard cycles directory
(Flash file system as well in the case of HMI
Embedded)
Specified path
The system looks for the COM file on the
NC, copies it to the HMI and reads it there.
© Siemens AG, 2005. All rights reserved
08/2005