Multi-Channel Sequential Programming (Option) - Siemens SINUMERIK 840D sl Commissioning Manual

08/2005
[BMP]
Any internal bitmaps can be specified in this section. The first bitmap in the [BMP]
section must have number 100, the second 101, etc.
The name must be specified in double inverted commas. If no path is stated, the
system searches for the bitmap in mmc2 or addon, oem, user..., otherwise in the
stated path.
Example: signal for measuring system 1 active:
[GLOBAL]
NrOfSignals=1
[BMP]
100="test.bmp"
101="c:\tmp\test2.bmp"
[SIG1]
text= "Measuring system 1 active"
Item= /Nck/MachineAxis/encChoice[u1, <AX>]
expr= if #=1 then BMP=100 else expr2
expr2= if #=0 then BMP=101 else BMP=2
Structure of the DGOVWTXT_XX.INI File
xx in the file name stands for the language abbreviation for the language-specific
file.
The only section is the [TEXT] section.
The individual tests are listed here in the form:
$T<Text-Nr>= "<any text>".
Values from 1000 to 32767 are permitted for <Text Nr> and may only occur once.
Values below 1000 are reserved for Siemens.
This file has to exist for all languages that are required. (Language abbreviation as
in mmc.ini). It is stored in the mmc2(user,addon, oem ...)\language directory

2.4.8 Multi-Channel Sequential Programming (Option)

Application
The configuration options for multi-channel sequential programming are described
in "SEDITOR.INI."
© Siemens AG, 2005. All rights reserved
SINUMERIK 840D sl/840D/840Di/810D Installation and Start-Up HMI (IAM) - 08/2005 Edition
Commissioning HMI Advanced (IM4)
2 Functions/Parameterization
IM4/2-69