Keys.ini; Maschine.ini - Siemens SINUMERIK 840D sl Commissioning Manual

Commissioning HMI Advanced (IM4)
2 Functions/Parameterization
[CONTEXT]
Extended_Sensivity=1
[TEXTSEARCH]
Search type=3

2.5.13 KEYS.INI

Entries in this file allow hard keys on the operator panel fronts OP 010 and OP
010c or SINUMERIK keyboards with hotkey block and PLC softkeys to be used.
See: /BE1/, Configuring OP Hotkeys and PLC Keys.

2.5.14 MASCHINE.INI

The [AccessLevel] section in the "maschine.ini" file can be used to make the
access authorization function settings. The file includes detailed comments.
[ACCESSLEVEL]
;
; 7 = Key position 0 everyone in front of the machine,
; 6 = Key position 1 machine operator, production shop-floor operators
; 5 = Key position 2 machine setter (more experienced), used to sets up tools
; 4 = Key position 3 not yet used, same permissions as 5
; 1 = manufacturer of machine only, System specialist
;
; 0 = manufacturer of Numeric Control only (Siemens experts)
; on delivery, all users are authorized for (almost) all work
JOG_PRESET=7 ; Preset or Set actual value at JOG mode
IM4/2-92
SINUMERIK 840D sl/840D/840Di/810D Installation and Start-Up HMI (IAM) - 08/2005 Edition
; = 0 Context sensitivity not active
; = 1 Context sensitivity active
; Notation in the section e.g.:
; = 1 Text search for instruction texts only
; = 2 Text search for descriptive texts only
; = 3 Text search for instruction and descriptive texts
; Notation in the section e.g.:
; Suggestion: Permission only for NC start, no selection of
part program
of production
; Suggestion: Permission to select part program, no editing
; and test and run new part programs
; Suggestion: Permission to modify (edit) part programs
==>5 Suggestion machine setter
© Siemens AG, 2005. All rights reserved
08/2005