Siemens SINUMERIK 840D sl Commissioning Manual page 278

Commissioning cnc part 2 (hmi)
Hide thumbs Also See for SINUMERIK 840D sl:
Table of Contents

Advertisement

Starting Up HMI Embedded (IM2)
3 Communication/Initial Requirements
3.4 "Blue screen" error status screen
If the system crashes, an error status screen ("Blue Screen") showing current
system information is displayed.
The error status screen displays a brief description of the error, which has
occurred, plus all relevant processor registers.
Backup option
A complete system data image is transferred to the CompactFlash card (optional).
System data display
In the event of a system crash, the crash address, the register allocation and any
additional information needed for crash analysis are displayed on the screen.
Sorry, but HMI Embedded has caused an exception in task XXXXX
Function at XXXXXXXX with code XXXXX
The type of exception is: XXXXXXXXXXXXXXXXXXXXX
The exception has occurred at cs: XX eip : XXXXXXXX!
EAX= XXXXXXXX EBX= XXXXXXXX ECX= XXXXXXXX EDX= XXXXXXXX
EDI= XXXXXXXX ESI= XXXXXXXX FLAGS= XXXXXXXX DS= XXXX ES= XXXX
SS= XXXX
Additional information:
XXXXXXXX loaded at: XXXXXXXX
XXXXXXXX loaded at: XXXXXXXX
...
XXXXXXXX loaded at: XXXXXXXX
CODE = XX XX XX XX
EIP:
STACK= XXXXXXXX
Please send the above or saved information to the SINUMERIK Hotline!
email:
Fill in subject: "HMI-Embedded exception (SW XX.XX.XX; date)"
Press 'S' to save data or press 'R' to reboot immediately
When you select key:
"S" (Save) you open the menu for saving data,
"R" to restart the NCU.
IM2/3-28
SINUMERIK 840D sl/840D/840Di/810D HMI Installation and Start-Up Guide (IAM) – 08/2005 Edition
ESP= XXXXXXXX EBP= XXXXXXXX FS= XXXX GS= XXXX
XX XX XX XX
XX XX XX XX
XX XX XX XX
XX XX XX XX
XX XX XX XX
XX XX XX XX
XX XX XX XX
XXXXXXXX
XXXXXXXX
XXXXXXXX
XXXXXXXX
XXXXXXXX
XXXXXXXX
XXXXXXXX
ad.support@siemens.com
XXXXXXXX loaded at: XXXXXXXX
XXXXXXXX loaded at: XXXXXXXX
XXXXXXXX loaded at: XXXXXXXX
XX XX XX XX
XX XX XX XX
XX XX XX XX
XX XX XX XX
XX XX XX XX
XX XX XX XX
XX XX XX XX
XX XX XX XX
XXXXXXXX
XXXXXXXX
XXXXXXXX
XXXXXXXX
XXXXXXXX
XXXXXXXX
XXXXXXXX
XXXXXXXX
© Siemens AG, 2005. All rights reserved
08/2005
XX XX XX XX
XX XX XX XX
XX XX XX XX
XX XX XX XX
XXXXXXXX
XXXXXXXX
XXXXXXXX
XXXXXXXX

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sinumerik 810dSinumerik 840diSinumerik 840d

Table of Contents