Siemens SINUMERIK 840D sl Commissioning Manual page 474

Commissioning HMI Advanced (IM4)
2 Functions/Parameterization
Case 2 (see drawing):
1. Save display MD to floppy disk or network drive.
2. On HMI Embedded system
Program → ETC
Set BDx.tea operator data
→ Copy
→ ETC
3. Select destination medium: Network drive or floppy disk:
Paste
4. Activate inserted display machine data via Start-up
Start-up → Machine Data → Display MD → File Functions
Set directory and BDxxyy.tea file
→ Load
Additional Information on Display MD
More detailed descriptions of each MD can be found in the online help.
They can be modified if necessary by operators with the appropriate access
authorizations.
The meaning of the display MD is described in
References:
Their use is described in /BAD/, Operator's Guide HMI Advanced
IM4/2-80
SINUMERIK 840D sl/840D/840Di/810D Installation and Start-Up HMI (IAM) - 08/2005 Edition
/LIS/, Lists, Machine Data for the Operator Panel
© Siemens AG, 2005. All rights reserved
08/2005