Siemens SINUMERIK 840D sl Commissioning Manual page 193

08/2005
Name
$AA_IM[x]
$AA_IW[x]
$AA_LEAD_P[x]
$AA_LEAD_SP[x]
$AA_LEAD_SV[x]
$AA_LEAD_TYP[x]
$AA_LEAD_V[x]
$AA_LOAD[x]
$AA_MM[x]
$AA_MM1[x]
$AA_MM2[x]
$AA_MM3[x]
$AA_MM4[x]
$AA_MW[x]
$AA_OFF[x]
$AA_OFF_LIMIT[x]
$AA_OSCILL_REVER
SE_POS1[x]
$AA_OSCILL_REVER
SE_POS2[x]
$AA_OVR[x]
$AA_POWER[x]
$AA_S[x]
$AA_SOFTENDN[x]
$AA_SOFTENDP[x]
$AA_STAT[x]
$AA_SYNA_MEM
$AA_SYNC[x]
$AA_TORQUE[x]
$AA_TYP[x]
$AA_VACTB[x]
$AA_VACTM[x]
$AA_VACTW[x]
$AA_VC[x]
$AC_ALARM_STAT
$AC_AXCTSWA[CTn]
$AC_DELT
$AC_DRF[x]
$AC_DTBB
$AC_DTBW
$AC_DTEB
$AC_DTEPB
$AC_DTEPW
$AC_DTEW
$AC_FCT0[x]
$AC_FCT1[x]
© Siemens AG, 2005. All rights reserved
SINUMERIK 840D sl/840D/840Di/810D HMI Installation and Start-Up Guide (IAM) – 08/2005 Edition
Index Description
x=Axis Toolholder
x=Axis Toolholder position, setpoint
x=Axis Real leading value - position
x=Axis Simulated master value - position
x=Axis Simulated master value - velocity
x=Axis Source of leading value
x=Axis Real leading value - velocity
x=Axis Drive load in % (for 611D only)
x=Axis Measured value in machine coordinate system
x=Axis Access to meas. result in MCS
x=Axis Access to meas. result in MCS
x=Axis Access to meas. result in MCS
x=Axis Access to meas. result in MCS
x=Axis Measured value in workpiece coordinate system
x=Axis Overlaid motion for programmed axis
x=Axis Limit value axial offset $AA_OFF reached
x=Axis Current reversal position 1 oscill. in synchr. act.
x=Axis Current reversal position 2 oscill. in synchr. act.
x=Axis Axial override for motion-synchronous actions
x=Axis Drive active power in W
x=SpindleNo Spindle speed, setpoint
x=Axis Software limit position, negative direction
x=Axis Software limit position, positive direction
x=Axis Axis status
Free memory for motion-synchronous actions
x=Axis Coupling status of following axis in master value
coupling
x=Axis Drive torque setpoint in Nm
x=Axis Axis type
x=Axis Axial feed, actual value
x=Axis Axial feed, setpoint
x=Axis Axial feed, actual value
x=Axis Add. offset for path/axial feed
ESR alarm status
CTn=Axis container Axis container status
no.
Distance to go in the workpiece coordinate system
x=Axis DRF value
Distance from block start in basic coordinate system
Distance from the beginning of the block in the
workpiece coordinate system
Distance from block end in basic coordinate system
Distance to go, feed oscillation in the tool coordinate
system
Dist.-to-go infeed oscill. in workpiece coord. system
Distance from end of block in the workpiece
coordinate system
x=PolynomNo a0 coefficient acc. to polynomial for synchr. action
x=PolynomNo a1 coefficient acc. to polynomial for synchr. action
Expanding the Operator Interface (BE1)
8 Terms, Tables, Lists, Examples
BE1/8-187