Screen Form Properties - Siemens SINUMERIK 840D sl Commissioning Manual

Expanding the Operator Interface (BE1)
3 Syntax
3.3.2

Screen form properties

Header
Main body
of screen
form
Graphic
The properties of the screen form are defined in the start identifier line of the form
screen:
//M(Identifier/[Header]/[Graphic]/[Dimension]/[System or user variable]/[Graphic
position]/[Attributes])
where:
Identifier
Header
Graphics
Dimension
System or
user variable
Graphic position
BE1/3-26
SINUMERIK 840D sl/840D/840Di/810D HMI Installation and Start-Up Guide (IAM) – 08/2005 Edition
Display line with headline
Name of the screen form
Screen form header as text or call for text
(e.g., $85011) from a language-specific
text file (see Section 7.1 General information about the
configuring environment).
Graphics file (with path) in double quotation marks.
See also Subsection 3.3.10 "Display images".
Position and sized of main body of screen form in
pixels (distance from left, distance from top,
width, height), measured from the top left corner
of the screen. The measurements are separated
by commas.
System or user variable to which
current cursor position is assigned.
The cursor position can be sent to the NC/PLC
via the system or user variable.
The first variable has the index 1.
The sequence matches the configuring sequence
of the variables.
Position of graphic (distance from left, distance
from top) in pixels, measured from the top left
corner of the main body of the screen form. The
minimum clearance from the top is 18 pixels.
The data is separated by commas.
© Siemens AG, 2005. All rights reserved
08/2005