Table of Contents
Advertisement
396 SERVICING AND MAINTENANCE
Transfer Case
Fluid Level Check
The fluid level should be to the bottom edge of the fill hole
(A) when the vehicle is in a level position.
Transfer Case
Adding Fluid
Add fluid at the filler hole, until it runs out of the hole,
when the vehicle is in a level position.
Drain
First remove the fill plug (B), then the drain plug (C). The
recommended tightening torque for the drain and fill plugs
is 15 to 25 ft lbs (20 to 34 N·m).
CAUTION!
When replacing the plugs, do not overtighten them.
You could damage them and cause them to leak.
Selection Of Lubricant
Use only the manufacturer's recommended fluid. Refer to
"Fluids And Lubricants" in "Technical Specifications" for
further information.
Automatic Transmission
Selection Of Lubricant
It is important to use the proper transmission fluid to
ensure optimum transmission performance and life. Use
only the manufacturer's specified transmission fluid. Refer
to "Fluids And Lubricants" in "Technical Specifications"
for fluid specifications. It is important to maintain the
transmission fluid at the correct level using the recom-
mended fluid.
Advertisement
Table of Contents
