Figure 5-1 Maxpro Nvr Log On Dialog Box - Honeywell MAXPRO NVR Hybrid XE Installation And Configuration Manual

L O G G I N G O N A N D G E T T I N G S T A R T E D
5
Logging on Using Profiles
Figure 5-1
2.
3.
4.
Note:
Note:
5.
94
Click Start -> Programs -> Honeywell -> MAXPRO NVR. The Log On dialog box
(Figure 5-1) appears.
MAXPRO NVR Log on dialog box
Click the Language option, and then select the required language from the drop-down
list. The supported languages (selected during installation) are Arabic, Czechoslovakian,
Dutch, Polish, Portuguese, French, German, Russian, Italian, Spanish, Korean and English.
The default language is English (US English).
Clear the Windows Logged-In User check box and then enter your Username. The
default user name is admin. Honeywell recommends to create a new NVR user (See
Adding a User ) in the Configurator tab and use the same to logon.
Type your Password. The default password is trinity.
Honeywell recommends you to change the default Password before you logon to
MAXPRO VMS. See Changing the Default Password section to change the
password. See Securing MAXPRO NVR
settings. See Password Complexity and Expiry Enhancements
information on password setting.
Select the Windows Logged-In User check box for logging on using the
Windows authentication (uses current logged in Windows account credentials). If
the Windows Logged-In User check box is cleared, the MAXPRO NVR user
name and password is used for authentication. Ensure that you avoid using the
@ character in your password. Logon as Administrator only when an
administrative activity need to be performed, Operator is preferred for all other
activity.
If there is no profile set as default, then select the Profile corresponding to the MAXPRO
NVR server to which you want to connect.
chapter for more details on security
section for more
MAXPRO NVR 5.6 Installation and Configuration Guide