First Use Each Day (Tank And Boiler Empty) - Smeg SHR+ Translation Of The Original Instructions

9.2 First use each day (tank and boiler empty)

W ith the door/ hood closed:
Press and hold it dow n.
The display show s t he firmw are version and
updat e inst alled, t hen t he t ank and boiler
t emperat ures.
This is follow ed by FILL and t he boiler w at er
t emperat ure.
The boiler heat ing element symbol remains
lit unt il heat ing finishes. Once t he w at er in t he
boiler has been heat ed, filling of t he t ank st art s.
Wait for P1 - END t o appear and light L2 t o change
from blue t o green; if t he w at er in t he t ank has t o
be heat ed, comes on unt il t he set
t emperat ure is reached. The durat ion of t his st age
may vary depending on t he mains w at er
t emperat ure and on t he single-phase connect ion
(if possible, depending on t he m odel).
Press t he but t on quickly t o display t he t ank
(left ) and boiler (right ) t emperat ures for a short
t ime.
Load the dishes.
Close t he door / hood (depending on t he model).
N.B.: if t he aut ost art funct ion is set as ON and t he
dishw asher is ready, t he cycle st art s w hen t he
door is closed/ t he hood is low ered
1- Select t he program required by pressing .
Only with Autostart OFF:
2- Confirm t he program st art by pressing and
holding it dow n for 1 second (light L2 changes from
green t o blue).
Cycle in progress, t he progress of t he cycle is
displayed by vert ical bars w hich illum inat e in
sequence.
27