Chosing The Program - Smeg SHR+ Translation Of The Original Instructions

10 CHOSING THE PROGRAM

Scrolling t hrough t he programs available displays first t he program name (in English) and hen t he number
( P1, P2..... etc. ) follow ed by t he durat ion.
PROGRAM
DISHES Short
DISHES Long
TRAYS
POTS
CUTLERY
USER PR
(* ) The cycle duration stated above is guaranteed if the water intake temperature is as stated and recommended in the
"TECHNICAL DATA" table, and in all cases refers to the first cycle performed. For repeated cycles, operating conditions may vary
from installation to installation. If the dishwasher is supplied with cold water, the cycle duration might increase depending on
the intake water temperature and the "thermostop" setting.
Power blackouts.
If t he dishw asher is open w hen pow er is rest ored, t he display w ill read "
element w ill remain off, t o prevent t he risk of burns t o t he user.
Close the dishwasher to resume heating the water in the tank.
ENABLING/ DISABLING THE PROGRAM NAM E ON THE DISPLAY
The display show s t he program num ber P1, P2, P3 and name, Glass, Dishes, Cut lery et c. by default . You can
choose not t o display t he name of t he program. In t his case, only P1, P2, P3 et c. w ill be show n on t he
display.
The procedure must be carried out w it h t he machine switched off but pow ered .
Press and hold dow n t he start / pause but t on.
When t he vert ical lines | | | | | appear on t he display, release t he st art / pause but t on and t hen press it
again immediately.
The procedure is complet e; t here is no audible or visual confirmat ion.
It is possible t o check if t he procedure has been carried out correct ly w hen t he machine is sw it ched on again.
P1 Light ly soiled plat es
P2 Heavily soiled plat es
P3 To w ash pans and t rays
Pot s and pans
P4
P5 Int ensive programm w it h 70°C w ashing
P6 Cust omisable (see " set -up informat ion" )
30
TYPE OF DIRT DURATION (* )
1 min
2 min
3 min
4 min 10s
7 min 10s
1- 10 min
°
t
" and t he heat ing