Correct Maintenance - Smeg SHR+ Translation Of The Original Instructions

Table of Contents

3.3 Correct maintenance

 Do not clean the machine with a water jet machine, high-pressure or steam cleaners.

 Before performing any maintenance procedure on the appliance disconnect it from the mains

electricity supply. Touching live electrical components, even accidentally, may be very

dangerous.

 Never open the dishwasher's case. Electric shock hazard. Only the authorised technician

may access the internal parts of the dishwasher.

 The dishwasher may only be repaired by the authorised service organisation. Substandard

repairs may cause damage or danger for the user.

 No alterations or changes of any kind to the appliance's electrical circuits or mechanical

structure are permitted. The manufacturer declines all responsibility for damage arising from

unauthorised alterations.

 Replace any faulty parts only with genuine spare parts. The manufacturer declines all liability

for damage resulting from the use of non-genuine spare parts.

 The power supply cable, if fitted, must be replaced by the manufacturer or an authorised

service centre in accordance with the technical data specified on the wiring diagram

supplied with the appliance, to prevent all risks.

IN CASE OF INTERVENTIONS W HICH REQUIRE THE HOOD TO BE COM PLETELY OPEN, IT IS

NECESSARY TO BLOCK IT W ITH A SCREW DRIVER INSERTED IN THE SPECIFIC HOLE, AS

SHOW N IN THE PICTURES BELOW .

Table of Contents