Configuration Of The Device; Device Configuration Procedure - Siemens SICAM MMU 7KG9663 Device Manual

7 Operation

7.3 Configuration of the Device

7.3 Configuration of the Device
NOTE
The device contains two set of parameters. The set of parameters currently used for device operations is the
active set of parameters. The inactive set of parameters is called the passive set of parameters.
The following sections describe how to change and enable the passive set of parameters.
7.3.1

Device Configuration Procedure

If you have not changed the set of parameters since the first start of the device (see chapter 7.2.1), use the
factory settings (see chapter 7.3.3 and chapter 7.3.4). To change the settings of the set of parameters, proceed
as follows:
✧
Click the Configure tab on the User Interface.
Fig. 7-10
NOTE
The items in the Process connections menu show the current hardware and software configuration of the de-
vice.
86
Configure Tab
SICAM MMU 7KG9663, Device Manual
E50417-H1040-C514-A3, Edition 01.2016