Enabling Javascript - Siemens SICAM MMU 7KG9663 Device Manual

7 Operation
7.2 Start and Design of the User Interface
NOTE
When starting the device for the first time, a set of parameters with factory settings is loaded. You can modify
these settings during the parameterization (see chapter 7.3).
To set a different user language for the User Interface, open the Administrative menu on the Configure tab,
select the Device and language menu item and change the user language as described in chapter 7.3.4.3.
NOTE
If User Interface does not open or the displayed User Interface does not show the view depicted in figure 7-3,
JavaScript may be the cause. The operation of User Interface requires JavaScript. You may have to activate
JavaScript as described in chapter 7.2.2.
7.2.2

Enabling JavaScript

The operation of User Interface requires JavaScript.
Enable JavaScript as follows:
✧
Start Microsoft Internet Explorer.
✧
Click the Tools menu on the menu bar of Microsoft Internet Explorer.
✧
Select Internet options... from the Tools menu.
✧
In the Internet options dialog open the Security tab.
Fig. 7-2
78
Enabling JavaScript
SICAM MMU 7KG9663, Device Manual
E50417-H1040-C514-A3, Edition 01.2016