7 Operation
7.3 Configuration of the Device
7.3.3
Setting the Operational Parameters
In the Configure tab you can view and edit the set operational parameters. You can select the parameters in
the Operational menu in the navigation window. The submenus Process connections, Select automation
function and Administrative are available for making the settings. The submenus contain the following ele-
ments:
•
Process connections
−
AC measurement
−
Binary outputs
−
LEDs
•
Select automation functions
−
Measurand limits 1-8
−
Measurand limits 9-16
−
Group indications 1-4
•
Administrative
−
Time synchronization
−
Communication Ethernet
−
IEC 60870-5-104 (only if this bus protocol is activated)
−
I/O Unit subdevice
−
Device and language
NOTE
Observe the procedure for the device configuration described in chapter 7.3.1 when you set the operational pa-
rameters.
94
SICAM MMU 7KG9663, Device Manual
E50417-H1040-C514-A3, Edition 01.2016