Diagnosis - Siemens SICAM MMU 7KG9663 Device Manual

7.5.5

Diagnosis

7.5.5.1 Diagnosis Modbus
NOTE
The data for diagnosing Modbus TCP are only displayed if you have selected this bus protocol on the Config-
ure tab → Administrative menu → Ethernet communication element.
For protocols that are not selected, the Diagnosis Modbus input/output window shows the entry -none-.
✧
In the navigation window, click the Diagnosis menu and then Modbus.
The Modbus input/output window opens and the Modbus TCP protocol is displayed. For Modbus TCP,
the Standard server and the User-port server are analyzed.
Fig. 7-54
✧
To clear the counters for Modbus TCP, click Clear counters in the Modbus TCP section of the input/
output window.
All counters in the Modbus TCP section are reset to zero.
NOTE
The chapter 9.2.8 gives more details about diagnosing Modbus.
SICAM MMU 7KG9663, Device Manual
E50417-H1040-C514-A3, Edition 01.2016
Maintenance Tab, Diagnosis Modbus Input/output Window with Protocol Modbus TCP
7 Operation
7.5 Maintenance
137