Table of Contents
Advertisement
15 Operating Parameters
15.1 Process Connections
Operating mode
Energy increase per pulse
Output time pulse operating mode
1)
only if source type = indication
2)
only if source type = energy counter
3)
only if pulse output or source type = energy counter
15.1.3
LEDs
RUN
ERROR
H1
H2
Indication inverted
246
1)
Persistent
2)
1.0 Wh
3)
20 * 10 ms = 200 ms
LED
Device ready
-none-
no
Persistent
Persistent with fail safe
Pulse
Pulse with retrigger
0.1 Wh/VAh/varh to
1 000 000 Wh/VAh/varh
50 ms to 3 600 000 ms
Default Setting
Not settable
-none-
Device OK
Battery Failure
Settings Load
Settings Check
Settings Activate
Modbus TCP OK
Ethernet Link Error
Time Synchronization Error
Primary NTP Server Error
Secondary NTP Server Error
Daylight Saving Time
Default IP Address
Limit Violation x (x = 1 to 16)
Indication x from Remote (x = 1 to 8)
Rotating Field Clockwise
Group Indication x (x = 1 to 4)
IEC 60870-5-104 OK
Binary Input x-N I/O Unit (x = 1 to 3)
Binary Input x-P I/O Unit (x = 1 to 3)
External I/O Unit OK
no
yes
Setting Range
or user-defined names, see
chapter 15.2
SICAM MMU 7KG9663, Device Manual
E50417-H1040-C514-A3, Edition 01.2016
Advertisement
Table of Contents
