Left Panel - Sony 50P Operating Instructions Manual

Left Panel

1 DVCAM/DV select switch
Switches the recording mode between DVCAM and
DV (SP mode only). When you play back a tape, the
DVCAM/DV setting will be automatically switched;
you do not need to use this switch.
Notes
• The unit is not compatible with playing or recording
in consumer DV format (LP mode).
• If you switch the DVCAM/DV select switch setting
while recording, the unit automatically pauses the
recording and then resumes recording several seconds
later. Nothing is recorded during that interval. You
cannot change the mode smoothly while recording.
• It is recommended that you record in the DVCAM
format. There are some limitations with respect to
DV recording depending on machine specifications
and the consumer DV format as follows:
– The head system is optimized for DVCAM
recording. A DV recording overwrites the last track
just before the beginning of the recording. As a
result, at the border of these two recorded portions,
picture and sound may be distorted.
– The sound will be recorded unsynchronized.
(unlock mode)
– The time code is fixed to the drop frame mode.
(only for DSR-50)
– You cannot change the TC PRESET, UB PRESET,
TC FORMAT, TC RUN, TC/UB IN, TC MAKE,
UB TIME settings on the TC/UB SET menu. The
setting and status set at the time of the DVCAM
recording will be canceled.
(A lid is installed on the left panel at shipping.)
– The time code automatically progresses so that the
– If you start recording from a blank portion, the time
– The user bits are not recorded. When you play back
– Even if you input an external time code into the TC
• If you dub a consumer DV tape from the DV IN/OUT
connector, keep the following in mind:
– Set the DVCAM/DV select switch to DV. If the
– When you edit a tape with an invalid format in the
For details on the DVCAM/DV format compatibility, see
"Compatibility of DVCAM and DV Format" on page 99
(GB).
1 DVCAM/DV select switch
2 CONTROL connector
recorded tracks are continued.
code starts from 00:00:00:00.
the tape, the user bits display will be
"– – – – – – – –".
IN connector, the time code used will be the one
provided by the internal time code generator.
DVCAM/DV select switch has been set to
DVCAM, a tape with an invalid format (the
recording speed: DVCAM, sound: unsynchronized,
unlock mode) will be made. (The unit cannot
convert unlock mode sound to lock mode sound.)
DSR-70/70P, DSR-80/80P, DSR-85/85P, DSR-
2000/2000P, etc., there may be some restrictions.
Chapter 1 Overview
29
(GB)