Audio Dubbing; Index To Parts And Controls; Front Panel - Sony SLV-E811NP Service Manual

Table of Contents

Advertisement

Le-b
56
Audio dubbing
This feature lets you record over the
normal audio track. The monaural
sound previously recorded is replaced
while the original hi-fi sound remains
unchanged. Use this feature to add
commentary to a tape that you have
recorded with a camcorder.
Before you start editing...
¢ Turn on your TV and set it to the
video channel.
¢ Press INPUT SELECT to display "L2"
in the display window.
COUNTER
RESET
AUDIO DUB
1
Insert a source tape into the stereo system (or the playback VCR).
Search for the point to start playback and set it to playback pause.
2
Open the drop down panel and insert a prerecorded tape with its safety
tab in place into this (recording) VCR. Search for the end of the section
to be replaced and press Ii PAUSE.
Press COUNTER RESET on this VCR to reset the counter to
"OHO0MO00S."
4
Rewind the prerecorded tape to the beginning of the section to be
replaced.
The VCR pauses.
5 Press AUDIO DUB.
The audio dubbing indicator S appears in the display window.
6
Tostart editing, press the §1 PAUSE buttons on this VCR and the stereo
system (or other VCR) at the same time.
When the counter reaches "OHO0M00S," audio dubbing stops
automatically.
To stop while editing
Press the li STOP buttons on this VCR and the stereo system (or other VCR).
To listen to both the hi-fi and normal audio
Set AUDIO MIX to ON in the SET UP MENU (page 53). Use this feature to
listen to dubbed audio over the original hi-fi audio. When AUDIO MIX is
set to ON, the AUDIO MONITOR button does not function. Remember to
reset AUDIO MIX to OFF after playing the tape.
Editing
Ii
LR
ST
a
ON
NEES
RSS
ST
es]
Index to parts and controls
Refer to the pages indicated in parentheses (_) for details.
Front panel
[1] ON/STANDBY switch/indicator
(11)
[2] [EASY SET UP] button (13)
[3] 4 EJECT button (33)
[4] [> PLAY button (44)
[5] DUAL MODE SHUTTLE ring
(33, 44)
[6] @ REC button/guide lamp (53, 55)
{9]
IF)
fig
W@ STOP button (55, 56)
tl PAUSE button (55, 56)
RF CHANNEL button (11)
STANDBY DISPLAY switch (10)
EDIT switch (55)
LINE-2 IN VIDEO/AUDIO L/R
jacks (54)
Remote sensor (5)
continued
Additional Information | 61

Advertisement

Table of Contents
loading

This manual is also suitable for:

Slv-e811vc1Slv-e811vc2Rmt-v1392

Table of Contents