Sony 50P Operating Instructions Manual page 16

Location and Function of Parts
4 Monitor display section
1 FINE button
2 DISPLAY (LCD OFF/OFF/
ON) selector
3 DISPLAY (MENU/TC/
AUDIO) selector
4 SEL/PUSH EXEC dial
1 FINE button
If you press this button when the DISPLAY (MENU/
TC/AUDIO) selector 3 has been set to AUDIO, the
LCD monitor displays detailed audio level meters
centered around the audio level that you set through
the menu as well as various settings in text.
For details on the FINE screen, see "FINE screen" on page
20 (GB).
2 DISPLAY (LCD OFF/OFF/ON) selector
Switches the LCD monitor mode.
LCD OFF: Turns off the LCD monitor power.
OFF: Displays the LCD monitor. Text data is not
superimposed. The tape label, title and data codes
(camera data, and date/time recorded by the
camera) are displayed.
ON: Displays the LCD monitor. Text data is
superimposed.
Notes
• You can set the unit to display/hide a tape label, title
and data codes only from the menus.
• To change a menu setting, turn ON the DISPLAY
(LCD OFF/OFF/ON) selector or turn ON the
SUPERIMPOSE switch on the right panel. If the
LCD monitor or external monitor does not display a
superimposed screen, you cannot set a menu.
16
(GB) Chapter 1 Overview
3 DISPLAY (MENU/TC/AUDIO) selector
Switches the superimposed text data for display on the
LCD monitor.
MENU: Displays the menu screen.
TC: Displays the time codes, remaining battery, tape
remaining time, selected input signal, audio mode,
presence or absence of cassette memory, tape
label, title, etc.
AUDIO: Displays the audio levels.
Notes
• You can use the DSRM-20 (not supplied) to search
for the scene using the index signal on the tape. In
this case you can search for the scene regardless of
this selector setting. But you can display "–/+" only
while this selector is set to TC.
• If you change the setting of this switch during a
cassette memory search, the cassette memory search
is stopped.
5 LCD monitor